MarrFill Polymer Dispersion is a one-component, wateremulsifiable, transparent seal for coating systems. It is also a maintenance product for coating floors that are completely scattered with chips or for heavily soiled surfaces. MarrFill Polymer dispersion forms a fast drying hard wax layer and can be used both indoors and outdoors because of the high UV resistance. It prevents dust formation, scratching, pollution and protects against weather influences.
Product description
Properties
Existing: 1 layer of ca. 50 g/m²
Jerrycan of 5 ltr
- Completely solvent-free
- Resistant to weather influences
- Very scratch resistant
- Quick drying
- Vapour-open
- For indoor and outdoor use
Existing: 1 layer of ca. 50 g/m²
Jerrycan of 5 ltr
Technical data
- Finish
- silk matt
- Colour
- transparent
- Solid content
- 70%
- Density
- 1,0 kg/ltr
- Viscosity (23°C)
- ca. 100 mPa:s
- Drying times (20°C / 50% R.H.)
- walkable after 1 hour
- loadable after 3 hours
Surface preparation
MarrFill Polymer Dispersion can be applied directly to a cured new coating, without pretreatment. When applying MarrFill Polymer Dispersion to an existing coating, the surface must be pre-treated with an alkaline detergent product using a scrubbing machine. Shake the product well before use, because the mattifying agent can be sedimented over time. It is important that an even layer thickness is applied and that ponding on the surface is prevented.
Sustainability & Storage
MarrFill Polymer Dispersion has a shelf life of 12 months, provided that opened buckets are properly closed and stored frost-free, not in direct sunlight, between 5°C and 25°C.