MarrFill Levelprimer EC is a filled, two-component epoxy resin scraping layer with excellent adhesion on various substrates. This product can be applied to the hardened MarrFill Floorprimer EC, is solvent-free and is very suitable for filling and leveling holes and irregularities.
Product description
Properties
Sets of 15 kg
- Completely solvent-free
- Very good adhesion strength
- Very good sealing options
- Resistant to chemicals, oils, diluted acids and alkalis
Sets of 15 kg
Technical data
- Material
- filled epoxy spatula
- Density (20°C)
- 1,8 kg/ltr
- Viscosity (23°C)
- ca. 1100 mPa:s (comp A)
- ca. 170 mPa:s (comp B)
- Drying times (20°C / 50% R.H.)
- walkable after 14 hours
- mechanically resistant after 24 hours
- chemically resistant after 7 days
- Processing time (20°C)
- 40 minutes
- Shore D-hardness
- ca. 83
- Mixing ratio
- 2:1 parts by weight
- Epoxy resin-filler ratio
- 1:2 parts by weight
- Compressive strength
- ca. 100 N/mm² (DIN EN 196-1)
- Bending tensile strength
- ca. 40 N/mm² (DIN EN 196-1)
- Adhesion strength
- > 3,8 N/mm² (break in concrete)
- Application conditions
- minimally 8°C, optimally 15°C - 25°C
- HS-code
- 29072300 (comp A)
- 29212100 (comp B)
- UN-code
- 3082 (comp A)
- 2735 (comp B)
Surface preparation
The substrate must be coherent, absorbent and dry and cannot contain oil, wax or grease. With smooth, dense or cement-rich substrates, the substrate must always be roughened. Moving cracks in the underground must be closed. Add component B completely to component A and then mix with a slow running drill at max. 300 revolutions per minute for one minute. Then slowly add the filler and mix until a homogeneous mass is obtained.
Sustainability & Storage
MarrFill Levelprimer EC has a shelf life of 12 months, provided that opened buckets are properly closed and stored frost-free, not in direct sunlight, between 5°C and 25°C.
