Shop our CorrFill Primer PA

Product description

CorrFill Primer PA is a waterborne, two-component epoxy primer with a very good adhesion on several substrates. It has been developed as a first layer in a Ribbstyle coating
system to acquire a good adhesion on the substrate. Mainly used on concrete, (stainless) steel, polyester, aluminum and PVC.

Properties

High hardness
Very good wear resistance
Solvent free
Nearly odourless
Easy to maintain
Resistant to several oils, fuels and solvents

Application Easy to apply with roller or brush. Clean tools with water after use. Consumption & Packaging Usually 7 m²/ltr
Sets of 4 or 15 kg

Technical data

Finish: satin
Colour: grey
Solid content: ca. 64-68% (weight) / ca. 48-50% (volume)
Density: 1,44 - 1,46 g/cm³
Flashpoint: n/a
Viscosity: 40-70 P (Brookfield 20 Rpm)
VOC content: max. 0 g/ltr
EU limit values: 140 g/ltr (2007) / 140 g/ltr (2010)
Drying times (20°C / 50% R.H.): repaintable after 24 hours
: fully cured after 7 days
Application conditions: between 8°C and 55°C; max. 80% R.H.
HS-code: 32099000 (comp A)
: 39073000 (comp B)
UN-code: 3082 (comp B)

Surface preparation

Clean and degrease the substrate. The substrate must be dry and coherent (tensile strength at least 6 kg/cm²).

Sustainability & Storage

CorrFill Primer PA has a shelf life of 24 months, provided that opened buckets are properly closed and stored frost-free, not in direct sunlight, between 5°C and 25°C.