Shop our CorrFill Primer DL

Product description

Ready to use fixing primer based on solvent and chlorinated rubber with a very good adhesion on multiple surfaces. CorrFill Primer DL has been developed as a first layer in a Ribbstyle coating system to acquire a good adhesion on the substrate. Mainly used for coated steel and sandwich panels.

Properties

High fixation capacity
Improves the adherence
Unsaponizable
Flexible
Ready to use (do not dilute)

Application Easy to apply with roller or brush. After use clean tools with CorrFill Thinner DLT. Consumption & Packaging Usually 10 - 15 m²/ltr
Containers of 5 ltr

Technical data

Finish: satin
Colour: grey
Solid content: ca. 45-50% (weight) / ca. 36-38% (volume)
Density: 1,07 -1,11 g/cm³
Flashpoint: > 23°C
VOC content: max. 550 g/ltr
EU limit values: 750 g/ltr (2007) / 750 g/ltr (2010)
Layer thickness: 10 - 15 m²/ltr
Drying times (20°C / 50% R.H.): repaintable after 12 hours
: fully cured after 24 hours
HS-code: 32089091
UN-code: 1263

Surface preparation

Clean and degrease the substrate. If the substrate is an acrylic paint, this must not be recoated with CorrFill Primer DL. The acrylic paint is affected by the solvents of CorrFill Primer DL. In this case, replace CorrFill Primer DL with CorrFill Primer PA.

Sustainability & Storage

CorrFill Primer DL has a shelf life of 24 months, provided that unopened buckets are properly closed and stored frost-free, in a dry and well-ventilated area, not in direct sunlight, between 5°C and 25°C.