RibbFill Airtight XT is a waterborne, one-component sealing product with a very good adhesion on different substrates. RibbFill Airtight XT is specifically designed for the airtight and watertight finishing of surfaces and connections both indoors and outdoors. The product can also be applied to slightly damp surfaces.
Make sure the surface is dry, cleaned and dust-free. RibbFill Airtight XT can be applied directly onto plastic, polyethylene, wood and mineral substrates. Mix well before use! Apply RibbFill Airtight XT undiluted and evenly in different layers to the substrate onto a layer thickness of 1 to 3 milimeters. It is recommended to apply the second layer only after the first layer has cured. The application thickness must be measured (wet) using a layer thickness meter. For wall connections, ensure that the RibbFill Airtight XT forms a seamless membrane of +/- 15 cm on both surfaces. Please note that RibbFill Airtight XT cannot be diluted and cannot be used with continuous water load.
RibbFill Airtight XT has a shelf life of 12 months, provided that opened buckets are properly closed, are stored frost-free, not in direct sunlight, between 5°C and 25°C.